Comtech EF Data CRS-500 - Manual (Page 156)

CRS-500 1:N Redundancy System Revision 2
Ethernet-Based Remote Product Management MN-CRS500
8–18
8.5.3.4 Utility pages
Select the Info, Boot Slot, or Upload tab to continue.
8.5.3.4.1 Utility | Info
Use this page to configure a variety of CRS-500 general operating parameters. This page also
provides status-only information on the operating firmware.
Figure 8-7. Utility | Info Page
General Configuration
• Unit Name – Enter a Unit Name string of up to 24 characters. Once the desired string is
entered in this section, click [Submit] to save this setting.
• Serial Number (read-only) – The factory-assigned unit serial number is provided here for user
reference.
• Software Revision (read-only) – The version of the Current Active Firmware Image is provided
here for user reference.
Time and Date
• Unit Time (hh:mm:ss) – Enter a time using hh:mm:ss format in Coordinated Universal Time
UTC+0 (where hh = hour [00 to 23], mm = minutes [00 to 59], and ss = seconds [00 to 59]).