Comtech EF Data CRS-500 - Manual (Page 153)

CRS-500 1:N Redundancy System Revision 2
Ethernet-Based Remote Product Management MN-CRS500
8–15
8.5.3.2.3 Config | Remote Management
Use this page to set up and maintain usernames and passwords needed for communication with
the CRS-500 Web Server Interface.
Figure 8-4. Config | Remote Management Page
Network Settings
• MAC Address (read-only) – The MAC is set at the factory to a guaranteed unique address that
cannot be modified by the user.
• Management IP/Subnet, Gateway IP Addresses – Enter the desired Management IP/Subnet
address, and the Gateway IP Address Range in these text boxes.
Once the desired configuration settings have been made in this section, click [Submit] to save
these changes.
Administrator Credentials
Enter the desired Administrator Username and Password. Both fields can be any alphanumeric
combination with a maximum length of 10 characters. Re-enter the designated password in the
Confirm Password field, and then click [Submit] to save these changes.
SNMP Configuration
This section displays administration information for the CRS-500 Simple Network Management
Protocol (SNMP) feature:
• The default SNMP Read Only Community string is public.
• The default SNMP Write Community string is private.