AMETEK ASD Series - Manual (Page 74)

Programming: Digital Interface Control Sorensen ASD Series
4-16 M551177-01 Rev A
Table 4-6. FDR_Period Register Bits
Bit Field Description
1-12 FDR_Update_Period Integer number of seconds between FDR periodic updates when the unit’s output is enabled.
13 - 16 FDR_Decimation Module Vin scope capture decimation (scope frequency = 100,000 Hz / 2 ^ FDR_Decimation).
Table 4-7. Process_Config Register Bits
Bit Field Description
1 Setpoint_Select Process loop setpoint source: digital setpoint=1, analog setpoint=0
2 Output_Select Process output command parameter: voltage=1, current=0
3 Limit_Active If equal to “1”, the process limit signal using analog_Isetpoint is active
Table 4-8. EtherCAT_Config Register Bit
Bit Field Description
1 EtherCAT_Write_Disable If equal to “1”, the controller ignores any EtherCAT modification to write registers