AMETEK ASD Series - Manual (Page 108)

Programming: Digital Interface Control Sorensen ASD Series
4-50 M551177-01 Rev A
P OWER S UPPLY M ONITOR
The Power Supply Monitor window gives a graphical display of the power
supply’s current and voltage setpoint and monitor signals. The color key
for the different signals is located at the top of the window. The various
components of the power supply monitor are described as follows:
Component Description
Blue lines: Voltage setpoint and monitor are displayed in
different shades of blue.
Red lines: Current setpoint and monitor are displayed in
different shades of red.
Horizontal axis Represents time.
Scaling Shown along the bottom of the window.
Voltage (V): Vertical axis scaling for the voltage signals is
shown at the left side of the window.
Current (A): Vertical axis scaling for the current signals is
shown at the right side of the window.
Tool tips: If the cursor is held over signals in this window a
tool tip will appear showing the name of the signal
and the x and y values of the signal at that point.
Note: The timescale and update behavior of the window can be configured at the
“Monitor Window” group in the Advanced Settings page.