Zilog ZUSBOPTS - Manual (Page 415)

UM017105-0511 Running the Flash Loader from the Command
Zilog Developer Studio II – ZNEO™
User Manual
387
Running the Flash Loader from the Command
Processor
You can run the Flash Loader from the Command field. Command Processor keywords
have been added to allow for easy scripting of the Flash loading process. Each of the
parameters is persistent, which allows for the repetition of the Flash and verification pro-
cesses with a minimum amount of repeated key strokes.
Observe the following procedure to run the Flash Loader:
1. Create a project or open a project with a ZNEO microcontroller selected in the CPU
Family and CPU fields of the General page of the Project Settings dialog box (see
Project Settings—General Page – see page 47).
2. Set up the USB communication in the Configure Target dialog box (see Figure 61 on
page 76).
3. In the Command field (in the Command Processor toolbar), enter one of the follow-
ing command sequences to use the Flash Loader.
Displaying Flash Help
Setting Up Flash Options
Flash Setup Displays the Flash setup in the Command Output window
Flash Help Displays the Flash command format in the Command Output window
Flash Options "<File Name>" File to be flashed
Flash Options OFFSET = "<address>" Offset address in hex file
Flash Options NAUTO Do not automatically select
external Flash device
Flash Options AUTO Automatically select external
Flash device
Flash Options INTMEM Set to internal memory
Flash Options EXTMEM Set to external memory
Flash Options BOTHMEM Set to both internal and external
memory
Flash Options NEBF Do not erase before flash
Flash Options EBF Erase before flash
Flash Options NISN Do not include serial number