Zilog ZUSBOPTS - Manual (Page 106)

Menu Bar UM017105-0511
78
Zilog Developer Studio II – ZNEO™
User Manual
a. Select the Internal Flash checkbox if you want to use internal Flash. The internal
Flash memory configuration is defined in the CpuFlashDevice.xml file. The
device is the currently selected microcontroller or microprocessor.
b. If you want to use external Flash, select which Flash devices you want to program.
The Flash devices are defined in the FlashDevice.xml file.
c. The device is the current external Flash device’s memory arrangement. The exter-
nal Flash device options are predefined Flash memory arrangements for specific
Flash devices such as the Micron MT28F008B3. The Flash Loader uses the exter-
nal Flash device option arrangements as a guide for erasing and loading data to the
appropriate blocks of Flash memory.
d. In the External Flash Base field, enter the location in which you want external
Flash to start.
e. In the Units drop-down menu, select the number of Flash devices present.
For example, if you have two devices stacked on top of each other, select 2 in the
Units list box.
f. Click OK to return to the Configure Target dialog box.
6. Click OK .
Add. Click Add to display the Create New Target Wizard dialog box; see Figure 63.
Figure 62. Target Flash Settings Dialog Box