Zilog ZUSBOPTS - Manual (Page 109)

UM017105-0511 Menu Bar
Zilog Developer Studio II – ZNEO™
User Manual
81
If a Windows Security Alert is displayed with the following message: “ Do you want to
keep blocking this program? ”, click Unblock .
a. Click Refresh to search the network and update the list of available Ethernet
Smart Cables. The number in the Broadcast Address field is the destination
address to which ZDS II sends the scan message to determine which Ethernet
Smart Cables are accessible. The default value of
255.255.255.255 can be
used if the Ethernet Smart Cable is connected to your local network. Other values
such as
192.168.1.255 or 192.168.1.50 can be used to direct or focus the
search. ZDS II uses the default broadcast address if the Broadcast Address field
is empty.
b. Select an Ethernet Smart Cable from the list of available Ethernet Smart Cables by
checking the box next to the Smart Cable you want to use. Alternately, select the
Ethernet Smart Cable by entering a known Ethernet Smart Cable IP address in the
IP Address field.
c. Enter the port number in the TCP Port field.
d. Click OK .
Figure 65. Setup Ethernet Smart Cable Communication Dialog Box
Note: