Zilog ZUSBOPTS - Manual (Page 207)

UM017105-0511 Run-Time Library
Zilog Developer Studio II – ZNEO™
User Manual
179
< zneo.h > has the macro definitions for all ZNEO microcontroller peripheral registers.
For example:
Refer to the ZNEO product specifications for the list of peripheral registers supported.
< zneo.h > also has the macro definition for the ZNEO Flash option bytes:
< zneo.h > also has the macro definition for interrupt vector addresses:
Refer to the ZNEO product specifications for the list of interrupt vectors supported.
Functions
Nonstandard I/O Functions
This header contains nonstandard ZNEO-specific input/output functions.
T0H Expands to (*(unsigned char volatile near*)0xE300)
FLASH_OPTION0 Expands to a _Rom char at address 0x0.
FLASH_OPTION1 Expands to a _Rom char at address 0x1.
FLASH_OPTION2 Expands to a _Rom char at address 0x2.
FLASH_OPTION3 Expands to a _Rom char at address 0x3.
RESET Expands to address of Reset vector.
intrinsic void EI(void); Enable interrupts.
intrinsic void DI(void); Disable interrupts.
intrinsic void RI(unsigned short istat); Restores interrupts.
intrinsic void SET_VECTOR(int vectnum,void
(*hndlr)(void)); Specifies the address of an
interrupt handler for an inter-
rupt vector.
intrinsic unsigned short TDI(void); Tests and disables interrupts.
_DEFFREQ Expands to unsigned long default frequency.
_DEFBAUD Expands to unsigned long default baud rate.
_UART0 Expands to an integer indicating UART0.
_UART1 Expands to an integer indicating UART1.