Set config, Step, Stepin – Zilog ZUSBOPTS User Manual
Page 410: Set config step stepin
Supported Script File Commands
UM017105-0511
382
Zilog Developer Studio II – ZNEO™
User Manual
savemem SPACE="ROM" FORMAT=TEXT "c:\temp\file.txt"
STARTADDRESS="1000" ENDADDRESS="2FFF"
set config
The
set config
command activates an existing build configuration for or creates a new
build configuration in the currently loaded project. The following example presents the
syntax of the
set config
command:
set config "config_name" ["copy_from_config_name"]
The
set config
command performs the following functions:
•
Activates config_name if it exists.
•
Creates a new configuration named config_name if it does not yet exist. When com-
plete, the new configuration is made active. When creating a new configuration, the
Command Processor copies the initial settings from the copy_from_config_name
parameter, if provided. If not provided, the active build configuration is used as the
copy source. If config_name exists, the copy_from_config_name parameter is ignored.
The active/selected configuration is used with commands such as
option tool
name="value"
and
build
.
step
The
step
command performs a single step (stepover) from the current location of the pro-
gram counter. If the count is not provided, a single step is performed. This command starts
a debug session if one has not been started. The following example presents the syntax of
the
step
command:
step
stepin
The
stepin
command steps into the function at the PC. If there is no function at the cur-
rent PC, this command is equivalent to
step
. This command starts a debug session if one
has not been started. The following example presents the syntax of the
stepin
command:
stepin
Note: