Zilog ZUSBOPTS - Manual (Page 113)

UM017105-0511 Menu Bar
Zilog Developer Studio II – ZNEO™
User Manual
85
2. Click the Add button. The Add Project Configuration dialog box appears, as shown
in Figure 70.
3. In the Configuration Name field, enter the name of the new configuration.
4. Select a similar configuration from the Copy Settings From drop-down menu.
5. Click OK . Your new configuration is displayed in the configurations list in the Man-
age Configurations dialog box.
6. Click Close . The new configuration is the current configuration as shown in the
Select Build Configuration drop-down menu on the Build toolbar.
7. Now that you have created a blank template, you are ready to select the settings for
this new configuration. From the Project menu, select Settings . The Project Set-
tings dialog box is displayed.
8. Select the settings for the new configuration and click OK .
9. From the File menu, select Save All .
Figure 69. Manage Configurations Dialog Box
Figure 70. Add Project Configuration Dialog Box