Zilog ZUSBOPTS - Manual (Page 108)

Menu Bar UM017105-0511
80
Zilog Developer Studio II – ZNEO™
User Manual
1. Select the Use Selected Target button if you want to use the target listed to the right
of this button description or select the Target File button to use the Browse button
( ) to navigate to an existing target file.
If you select the Use Selected Target button, enter the name of the new target in the
Name for New Target field.
2. Select the Delete Source Target After Copy checkbox if you do not want to keep the
original target.
3. In the Place Target File In area, select the location in which you want the new target
file saved, whether in the project directory, the ZDS default directory, or another loca-
tion.
4. Click OK .
Delete. Click Delete to remove the currently-highlighted target. The following message is
displayed: “ Delete target_name Target? ”. Click Yes to delete the target or No to can-
cel the command.
Debug Tool. Select the appropriate debug tool in the Current drop-down menu.
•
If you select EthernetSmartCable and click Setup in the Debug Tool area, the
Setup Ethernet Smart Cable Communication dialog box is displayed; see
Figure 65.
Figure 64. Target Copy or Move Dialog Box