Zilog ZUSBOPTS - Manual (Page 409)

UM017105-0511 Supported Script File Commands
Zilog Developer Studio II – ZNEO™
User Manual
381
quit
The quit command ends the current debug session. The following example presents the
syntax of the quit command:
quit
rebuild
The rebuild command rebuilds the currently open project. This command blocks the
execution of other commands until the build process is complete. The following example
presents the syntax of the
rebuild command:
rebuild
reset
The reset command resets execution of program code to the beginning of the program.
This command starts a debug session if one has not been started. The following example
presents the syntax of the
reset command:
reset
By default, the reset command resets the PC to symbol 'main'. If you deselect the Reset
to Symbol 'main' (Where Applicable) checkbox on the Debugger tab of the Options
dialog box (see Options—Debugger Tab – see page 102), the PC resets to the first line of
the program.
savemem
The savemem command saves the memory content of the specified range into an Intel hex
file, a binary file, or a text file. The functionality is similar to the Save to File command
available from the context menu in the Memory window (see
Save Memory to a File – see
page 335). The following example presents the syntax of the savemem command:
savemem SPACE="<displayed spacename>" FORMAT=
"<[PATH\]name>"
[STARTADDRESS="<hexadecimal address>"] [ENDADDRESS="<hexadecimal
address>"]
If STARTADDRESS and ENDADDRESS are not specified, all of the memory contents of a
specified space are saved.
For example:
savemem SPACE="RDATA" FORMAT=BIN "c:\temp\file.bin"
STARTADDRESS="20" ENDADDRESS="100"
savemem SPACE="ROM" FORMAT=HEX "c:\temp\file.hex"