Datapath Wall Control - Manual (Page 95)

IP-Camera Carousel Settings
The Carousel Settings sheet allows you to define a number of inputs which the window will cycle through allowing you to view
each in turn. The inputs to be used are defined by creating a Display List, each entry in the list can be viewed for a specified
duration. Once a Carousel Display List has been created, starting the Carousel causes the IP-Camera window to automatically
cycle through the list of inputs.
To configure the Carousel properties for a IP-Camera window, right click on the active window and select Carousel Properties
and the following dialogue is displayed:
When the Carousel Settings dialogue is displayed, the IP-Camera window is disabled, preventing other users from modifying or
closing it.
The Carousel Settings dialogue has the following groups:
Input Selection
Carousel Display List
Input Selection
Using the Input drop down menu, select the required input source. Its display time may be adjusted in one second intervals
using the Duration time control. The minimum display time is one second and the maximum is one day. The default setting is
one minute.
Carousel Display List
When the input and duration have been selected, click Insert to place the input on the Carousel Display List. The list displays
the input label, the duration of the display.
To remove an input from the display list, select the input and click on Remove . To change the display parameters, for example
increase the duration, select the input from the list and amend the duration to the required time. Once changes to the input
have been made click on
Update to update the list.
Note: Modifying an input will not affect the Display List until the Update button has been clicked.
When the list of displays has been compiled the order in which they are displayed can be changed by selecting an input and
using the up/down arrows to alter its position within the list.
95 / 155