Datapath Wall Control - Manual (Page 61)

IP-Camera Window Properties
The IP-Camera Window Properties sheet enables you to change the appearance of the IP-Camera window.
Select "Window Properties" with an IP-Camera window activated and the following dialogue is displayed.
Any changes made to the settings on the Windows Properties sheet will not take effect until the
Apply button has been clicked.
When the IP-Camera Properties dialogue is displayed, the IP-Camera window is disabled, preventing other users from
modifying or closing it.
The IP-Camera Window Properties sheet has the following groups:
Position
Size
Aspect Ratio
Style
Window ID
Caption
Position
The position of the selected IP-Camera window can be adjusted to suit your requirements.
Using the up and down arrows the selected IP-Camera window can be positioned anywhere on the desktop. The values are in
pixels. The values Top = 0 and Left = 0 will position the IP-Camera window in the top left corner of the desktop (or Primary
Monitor). When the required values have been entered, click on
A pply and the changes will take effect.
Size
The size of the selected IP-Camera window can be adjusted to suit your requirements.
Width and Height
61 / 155