Datapath Wall Control - Manual (Page 107)

Server Applications
Selecting Server Applications displays the following dialogue:
The Server Application Manager shows the status of each of the server applications installed on the Wall Control-red server
and allows them to be started, stopped and configured.
The Status column indicates the status of each of the server applications:
Running indicates that the server application is running correctly. To stop the server application click on the Stop button.
Stopped indicates that the server application is not running. To start the server application click on the Start button. If the
server application fails to start, you will need to look in the application Event Viewer .
Error indicates that the server application is running but that it encountered a problem that will prevent it from functioning
correctly. Click on the Details button to see a message describing the problem. You should correct the problem and start the
server application again.
Port Number
The Port number describes the communication channel between the local and remote machines.
A port conflict will occur if another application is using the same Port number.
Port Name
The Port name describes the communication channel used when the application and server are on the same machine.
Once the Port number or Port name has been configured, click OK to continue. The server application will need to be stopped
and started again for the changes to take effect.
107 / 155