Datapath Wall Control - Manual (Page 136)

Change the position and size of the window.
All the values are optional but the commas must be used.
- WindowStyle ={ BorderAndTitleBar | BorderOnly | NoBorderOrTitleBar }
The following command line options allow changes to the appearance of the IP-Camera source. The numbers correspond to
the values displayed on the Input Settings sheet.
Networking Options
To control a window on a machine other than the one you are working on you will need some of the following options:
-Machine= {machine name|IP address }
Use this option to specify the machine to connect to.
-Port= port number
You need to specify the port if you are attempting to control a window on another machine and the server has been configured
to listen on a port other than the default port 1049.
A port number is any integer between 1 and 65535.
If the server requires a User Name and Password, the following options should be used:
-UserName= user name
-Password= password
If the machine is not participating in a domain, the account must be on the machine you are connecting to.
If the machine is participating in a domain you have a choice:
The account can be on the machine you are connecting to.
It can be an account on the domain.
If the account is on the domain, the domain name must be specified with the following option:
-Domain= domain name
On Screen Display (OSD)
Click here for OSD Command Line Interface
136 / 155