Datapath Wall Control - Manual (Page 114)

IP-Camera Configuration
When IP-Camera is selected the following dialogue is displayed. If the system has no Render Stations previously configured,
the dialogue will open on the Configure Render Stations tab.
One or more Render Stations must be successfully configured before any IP-Camera windows can be opened. The outputs
from Render Stations are captured using VisionRGB-E2 inputs. You must ensure that there are enough VisionRGB-E2 inputs
available in your system for the number of licensed Render Stations.
To configure a Render Station, click on Add... and the following dialogue is displayed:
Using the Vision Input drop down menu select an input to allocate as the input channel. This channel will be removed from the
list of available Vision sources in the Wall Control-red application toolbar.
The Render Station will output two screens, A and B. Select the screen you wish to allocate to the selected Vision input.
Insert the IP Address / Host Name into the edit box and click on OK.
The Render Station configuration dialogue will now display details of the configured Render Station. Continue to add more
Render Stations as required.
114 / 155