Datapath Wall Control - Manual (Page 75)

Equalisation
When using the VisionDVI-DL the Equalisation function becomes available. The VisionDVI-DL supports longer input cable
lengths (up to 20m). Use the Boost slider to increase signal strength for longer input cables.
Colour Adjustments
Brightness
The Brightness control allows you to brighten or darken the capture.
Contrast
The Contrast control allows you to alter the difference between the light parts of the capture and the dark parts of the capture.
Colour Domain
The Colour Domain control allows you to change the detected colour domain format for the capture input. In some instances
the driver may incorrectly detect the colour space, the Colour Domain control enables you to override it.
Saturation
The Saturation control allows you to increase or decrease the saturation
Hue
The Hue control allows you to increase or decrease the hue. This is only available for NTSC captures.
Click on the
Colour Balance… button to change the colour balance for the specified input connector. This function is only
available when capturing analog sources.
Note:
All Colour controls are the only ones available when a DVI source is being captured., The Red, Green and Blue controls are for
RGB analog only.
75 / 155