Datapath Wall Control - Manual (Page 27)

Connect
Select Connect and the following dialogue is displayed:
Use this dialogue to specify which machine is to be controlled using the Wall Control-red application
Use the drop down arrow to display a list of the most recently selected machines; the list will include My Computer which can
be used to connect to the machine where the Wall Control-red application is running.
The machine can be specified by name or by IP address.
Select Browse… to locate a machine on the local network.
Windows
Add existing windows to representation:
Displays the open windows.
Close existing windows:
Will close all Wall Control-red managed windows.
Click on OK to connect to the selected machine.
If you connect to a machine that has been configured to authenticate connections, you will be required to provide a user name
and password. The user name and password must be for an account machine you are connecting to or on the domain if the
machine is part of a domain.
27 / 155