Datapath Wall Control - Manual (Page 73)

The Vision Input Settings sheet has the following groups:
Source
Capture Settings
Resolution and Refresh
Cropping
Video Adjustments
Colour Adjustments
Source
The Source control specifies which source is displayed in the window. Select the input from the drop down list. You can give
the inputs meaningful labels in the
Configure Vision dialogue.
When you change inputs, the Capture Settings controls may change.
See the Vision User Manual for information on the input connections.
Capture Settings
Share these capture settings across all inputs.
With Share these capture settings across all inputs selected, the changes you make to the capture settings controls will be
shared with other inputs of the same type. The capture settings will also be saved automatically so that the next time a Vision
window is created, the capture settings can be used.
Use these capture settings with this input only.
With Use these capture settings with this input only selected, the changes you make to the capture settings controls will
be applied to this Vision window only.
73 / 155