Datapath Wall Control - Manual (Page 37)

The Application Input dialogue allows the user to identify and select Applications created in the
Configure Application
dialogueue.
Application
Use the Application drop down list to select the required Application. The list will only display those Applications that have been
configured on the system.
Input
When the Application has been selected, use the Input drop down list to select the required input associated with the
Application.
Switches
Once the Application and input have been selected the Switches edit box is automatically populated with the switches for that
specific application.
Path
Once the Application and input have been selected the Path edit box is automatically populated with the path to the application.
Command Line
The command line window displays the resulting command from the switches and path edit boxes. The command is executed
by clicking the
Run button.
A new input can be created by editing the
Input drop down list. Type in the name of the new input and edit the path or browse to
a new file in the Path edit box. By clicking on the Run and Save button the new input will run and be saved on the system. The
new input with be displayed in the input window on the Configure Application dialogueue.
This dialogueue cannot be used to modify and save an existing input.
Any modifications to the
Switches edit box will result in the Run and Save button being disabled irrespective of other changes
made to any other controls on this dialogueue.
37 / 155