Datapath Wall Control - Manual (Page 122)

Add
The Add button allows a new custom application to be added to Wall Control-red. Click the Add button and the Add Application is
displayed. Enter a unique Application name and a valid path in order to add the new Application to the system. Note: custom
Applications have restricted functionality and in some cases may exhibit compatibility issues with Wall Control-red.
Modify
The settings for an application can be accessed by clicking the Modify button. This displays the Modify Applications dialogue in
which the Name, Path and Switches can be changed in order to override any default values for the application. These values
can also be restored back to their default values by pressing the 'Default' button. Only pre-installed supported applications can
be restored to their default values. For any applications that have been added by the user, the Default button will be greyed out.
Remove
The Remove button allows a custom application to be removed from the list. Only custom applications created using the Add
button can be removed. The Remove button is disabled if a non custom application is selected.
Inputs Group
The lower pane of the Application dialogue lists the inputs that have been configured for the selected application.
Name
The name field shows the user defined name for the application input.
Path
The path field shows the user defined path for the application input. This may consist of either a file path or a URL depending on
the application. This path string will be appended to the string from the application's 'Command Line Switches' field (if set)
when the input is opened from the Wall Control toolbar. The path string will also be used when an input is changed for the
application window that is already open (without the 'Command Line Switches' string). It is therefore important that the Path
string does not contain any command line switches (ex. -Input=). If switches are required then these should be entered
separately into the 'Command Line Switches' field described above.
Add
The Add button allows a new input to be added for the Application that is currently selected. When the Add button is clicked, the
Add Input dialogue is displayed. A unique input name and valid path name must be entered in order to add a new input to the
system.
Modify
The settings for an input can be accessed by clicking the modify button. This displays the Modify input dialogue in which the
Name and Path can be changed.
Remove
The remove button allows a selected input to be removed from the list.
122 / 155