BINDER CB 60 - Manual (Page 89)

CB (E6) 09/2013 Page 89/144
13.2 Defining the display range
To define the display range, go to Menu > Measurement chart > Settings > Display range
Fixed value 08.03.2013 05:05:06
Submenu “Display range” (unit with O
2
control).
Select the desired parameter
and press the operating button.
Display range
Temperature
Humidity
CO2
O2
Safety controller temperature
Door temperature
Close Home
Fixed value 08.03.2013 05:05:06
Entry menu for temperature “Enter minimum value”.
Enter the desired value with the operating button
and press the operating button to confirm.
..\ Enter minimum value
2 0.00 [°C]
2
Pos1 End Ok 0 1 3 4 5 6 7 8 9 . -
Close Ok Home
Fixed value 08.03.2013 05:05:06
Entry menu for temperature “Enter maximum value”.
Enter the desired value with the operating button
and press the operating button to confirm.
..\ Enter maximum value
4 5.00 [°C]
4
End Ok 0 1 2 3 5 6 7 8 9 . - Del
Close Ok Home
You can now define the view range of the other parameters or press the “Close” button twice to go back
to the graphic display.