BINDER CB 60 - Manual (Page 73)

CB (E6) 09/2013 Page 73/144
If no USB device has been connected, the message “Insert USB device” is displayed. It
disappears after inserting the USB stick or the plug of your USB drive into the USB port in the
instrument box.
This symbol on the controller displays indicates that data are being transmitted via the USB
port.
10.2 Importing data from USB drive
Insert the USB stick or the plug of your USB drive into the USB port in the instrument box.
To configure data import from USB media, go to
Menu > Import/Export > Import from USB drive
Fixed value 08.03.2013 05:05:06
Submenu “Import from USB drive”.
Select “Configuration”
and press the operating button.
Data is read from the connected media.
..\ Import from USB drive
Configuration
Close Home
Configuration
(Service only)
If no USB device has been connected, the message “Insert USB device” is displayed. It
disappears after inserting the USB stick or the plug of your USB drive into the USB port in the
instrument box.
This symbol on the controller displays indicates that data are being transmitted via the USB
port.