BINDER CB 60 - Manual (Page 83)

CB (E6) 09/2013 Page 83/144
Then you can enter the delay time for the CO
2
tolerance range alarm:
Enter alarm delay [min] 08.03.2013 05:05:06
Entry menu “CO2”
Enter the desired delay time in minutes with the
operating button.
Press the “Ok” button to confirm.
..\ Tolerance ranges \ CO2
1
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
Humidity
First you can enter the lower value of the humidity tolerance range:
Enter Humidity Low Limit 08.03.2013 05:05:06
Entry menu “Humidity”.
Enter the desired value for the lower value
of the humidity tolerance range
with the operating button.
Setting range: 0 % r.H. up to 100 % r.H.
Press the “Ok” button to confirm.
..\ Tolerance ranges \ Humidity
1 .0 [%rH]
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
Then you can enter the upper value of the humidity tolerance range:
Enter Humidity High Limit 08.03.2013 05:05:06
Entry menu “Humidity”.
Enter the desired value for the upper value
of the humidity tolerance range
with the operating button.
Setting range: 0 % r.H. up to 100 % r.H.
Press the “Ok” button to confirm.
..\ Tolerance ranges \ Humidity
1 .0 [%rH]
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.