BINDER CB 60 - Manual (Page 70)

CB (E6) 09/2013 Page 70/144
9.11 RS 422 address (with optional RS 422 interface)
For chambers equipped with the optional RS 422 interface, the RS 422 address serves to identify the
chamber in a network and to establish communication with the optional BINDER communication software
APT-COM™ 3 DataControlSystem. The factory default setting is “1”.
To enter the RS 422 unit address, go to
Menu > Settings > RS 422 address (optional)
Fixed value 08.03.2013 05:05:06
Entry menu “RS 422 address”.
Enter the desired address (1 up to 254) with the
operating button.
Press the “Ok” button to confirm.
..\ RS 422 address
1
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
Go back to the “Settings” menu with “Close” or to the initial view with “Home”.