BINDER CB 60 - Manual (Page 87)

CB (E6) 09/2013 Page 87/144
12. Event list
The “Event list” displays status information and errors of the current day. You can also access the events
of past days.
To access the event list, go to
Menu > Event list or User > View event list
Fixed value 08.03.2013 15:05:18
Submenu “Event list” (example).
The events of the current day are displayed. The
most recent message appears at the end of the list.
If you want to acknowledge an active alarm, proceed
as described in chap. 11.4.
..\ Event list
08.03.2013 Messages of indicated day
14:17:20 Temperature setpoint 35.00
14:35:12 Temperature setpoint 37.00
14:39:48 Alarm set Safety controller overtemperature
14:40:19 Alarm acknowledged Safety controller overtemp.
15:03:22
Alarm cleared Safety controller overtemperature
Close Reset Home
When there is more information than one page, you can scroll the event list in both directions with the
operating button.
To select a different date, select “Messages of indicated day” and press the operating button. You can
enter the desired date through an entry menu.
Fixed value 08.03.2013 05:05:06
Entry menu “Select date”.
The current date is shown. Enter the desired date
with the operating button.
Press the “Ok” button to confirm.
..\ Select date
0 8.03.2013
0
Ins Pos1 End Ok 1 2 3 4 5 6 7 8 9
Close Ok Home
The event list of the selected date is displayed.