BINDER MK 115 User Manual
Operating manual, Apt.line™ mkf (e3.1), Apt.line™ mkft (e3.1)
Issue 07/2014
Art. No. 7001-0219
Operating Manual
Translation of the original operating manual
APT.line™ MKF (E3.1)
Alternating climate chambers with program control
Model
Art. No.
Kit No. (unit with voltage and
frequency changer)
MKF 115 (E3.1)
9020-0107, 9120-0107
9020-0291
MKF 240 (E3.1)
9020-0183, 9120-0183
9020-0295
MKF 720 (E3.1)
9020-0198, 9120-0198
9020-0299
APT.line™ MKFT (E3.1)
Alternating climate chambers with deep temperature
with program control
Model
Art. No.
Kit No. (unit with voltage and
frequency changer)
MKFT 115 (E3.1)
9020-0152, 9120-0152
9020-0293
MKFT 240 (E3.1)
9020-0080, 9120-0080
9020-0297
MKFT 720 (E3.1)
9020-0083, 9120-0083
9020-0301
BINDER GmbH
Address
Post office box 102
D-78502 Tuttlingen
Tel.
+49 7462 2005 0
Fax
+49 7462 2005 100
Internet
http://www.binder-world.com
Service Hotline
+49 7462 2005 555
Service Fax
+49 7462 2005 93 555
Service E-Mail
Service Hotline USA
+1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific
+852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS +7 495 988 15 16
Document Outline
- EC – Declaration of Conformity MKF (E3.1)
- EC – Declaration of Conformity MKFT (E3.1)
- Certificate for the GS mark of conformity of the “Deutsche Gesetzliche Unfallversicherung e.V.” (German Social Accident Insurance, DGUV)
- Product registration
- 1. Safety
- 1.1 Legal considerations
- 1.2 Structure of the safety instructions
- 1.3 Localization / position of safety labels on the unit
- 1.4 Type plate
- 1.5 General safety instructions on installing and operating the alternating climate chamber MKF / MKFT
- 1.6 Intended use
- 1.7 Operating instructions
- 1.8 Measures to prevent accidents
- 1.9 Resistance of the humidity sensor against harmful substances
- 2. Unit description
- 3. Completeness of delivery, transportation, storage, and installation
- 4. Installation and connections
- 4.1 Wastewater connection for humidifying system
- 4.2 Freshwater supply for humidifying system
- 4.3 Connection of cooling water outlet for water cooling (option)
- 4.4 Connection of cooling water inlet for water cooling (option)
- 4.5 Connection kit for connecting the unit’s freshwater connection to a water pipe
- 4.6 Safety kit: Hose burst protection device with reflux protection device for the unit’s freshwater connection (available via BINDER INDIVIDUAL customized solutions)
- 4.7 Installation of the voltage and frequency changer(units with voltage and frequency changer)
- 4.8 Electrical connection
- 5. Start up
- 6. Controller MB1 settings
- 7. Graphic representation of the historical measurement (chartrecorder function)
- 8. Manual Mode
- 9. Program operation
- 9.1 Menu-based program entry
- 9.2 Entering the temperature values and the switching states of the operation lines
- 9.3 Entering the humidity values
- 9.4 Selecting between set-point ramp and set-point step
- 9.5 Program entry as set-point ramp or as set-point step
- 9.6 Information on programming different temperature or humidity transitions
- 9.7 Repetition of a section or several sections within a program
- 9.8 Performance after power failure in Program Mode
- 9.9 Starting a previously entered program
- 9.10 Deleting a program
- 9.11 Temperature profile and operation lines template
- 9.12 Humidity profile template
- 9.13 Program table template for temperature and operation lines
- 9.14 Program table template for humidity
- 10. Bedew protection facility (Operation line 1)
- 11. Zero-voltage relay outputs via operation lines 2 to 5
- 12. Temperature safety devices
- 13. Notification and alarm functions
- 14. Humidity system
- 15. Defrosting at refrigerating operation
- 16. Options
- 16.1 Communication software APT-COM™ 3 DataControlSystem (option)
- 16.2 Interface RS 422 (option)
- 16.3 Analog outputs for temperature and humidity (option)
- 16.4 Data logger kits
- 16.5 Keyboard locking (option)
- 16.6 BINDER Pure Aqua Service (option)
- 16.7 Compressed air dryer (option)
- 16.8 Water cooling (option)
- 16.9 Additional measuring channel for digital object temperature indicator with flexible temperature sensor Pt 100 (option)
- 17. Maintenance, cleaning, and service
- 18. Disposal
- 19. Troubleshooting
- 20. Technical description
- 20.1 Factory calibration and adjustment
- 20.2 Over current protection
- 20.3 Definition of usable volume
- 20.4 MKF (E3.1) technical data
- 20.5 MKFT (E3.1) technical data
- 20.6 Equipment and Options MKF / MKFT
- 20.7 Accessories and spare parts
- 20.8 Heating-up and cooling-down graphs MKF
- 20.9 Heating-up and cooling-down graphs MKFT
- 20.10 Dimensions MKF 115 / MKFT 115
- 20.11 Dimensions MKF 240
- 20.12 Dimensions MKFT 240
- 20.13 Dimensions MKF 720 / MKFT 720
- 21. Contamination clearance certificate
- Word-Lesezeichen
- Leere Seite