BINDER KMF 115 User Manual
Operating manual, Apt.line™ kmf (e5.3)
Issue 07/2014
Art. N0. 7001-0285
Operating Manual
APT.line™ KMF (E5.3)
Constant climate chambers
with enlarged temperature and humidity range
with program control
Model
Art. No.
KMF 720 (E5.3)
9020-0192, 9120-0192
BINDER GmbH
Address
Post office box 102
D-78502 Tuttlingen
Tel.
+49 7462 2005 0
Fax
+49 7462 2005 100
Internet
http://www.binder-world.com
Service Hotline
+49 7462 2005 555
Service Fax
+49 7462 2005 93 555
Service E-Mail
Service Hotline USA
+1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific
+852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS +7 495 988 15 16
Table of contents
Document Outline
- EC – declaration of conformity
- Product registration
- 1. Safety
- 1.1 Legal considerations
- 1.2 Structure of the safety instructions
- 1.3 Localization / position of safety labels on the unit
- 1.4 Type plate
- 1.5 General safety instructions on installing and operating the constant climate chamber
- 1.6 Intended use
- 1.7 Resistance of the humidity sensor against harmful substances
- 2. Unit description
- 3. Completeness of delivery, transportation, storage, and installation
- 4. Installation and connections
- 4.1 Spacer for wall distance
- 4.2 Wastewater connection
- 4.3 Freshwater supply
- 4.3.1 Automatic fresh water supply via water pipe
- 4.3.2 Manual fresh water supply via external freshwater can (option)
- 4.3.3 Connection kit for connecting the unit to the water main
- 4.3.4 Safety kit: Hose burst protection device with reflux protection device (available via BINDER INDIVIDUAL customized solutions)
- 4.4 Electrical connection
- 5. Start up
- 6. MB1 controller settings
- 7. Graphic representation of the historical measurement (chart recorder function)
- 8. Manual Mode
- 9. Program operation
- 9.1 Menu-based program entry
- 9.2 Entry of temperature values and fan speed
- 9.3 Entry of humidity values
- 9.4 Selecting between “set-point ramp” and “set-point step”
- 9.5 Program entry as “set-point ramp” or as “set-point step”
- 9.6 Information on programming different temperature or humidity transitions
- 9.7 Repetition of a section or several sections within a program
- 9.8 Performance after power failure in Program Mode
- 9.9 Starting a previously entered program
- 9.10 Deleting a program
- 9.11 Template for temperature profile
- 9.12 Template for humidity profile
- 9.13 Program table template for temperature and fan speed rate
- 9.14 Program table template for humidity
- 10. Temperature safety devices
- 11. Notification and alarm functions
- 12. Humidity system
- 13. Defrosting at refrigerating operation
- 14. Options
- 14.1 Communication software APT-COM™ 3 DataControlSystem (option)
- 14.2 Interface RS 422 (option)
- 14.3 Data logger kits (option)
- 14.4 Analog outputs for temperature and humidity (option)
- 14.5 Keyboard locking (option)
- 14.6 Additional flexible Pt 100 temperature sensor (option)
- 14.7 External freshwater and wastewater cans (option)
- 14.8 BINDER Pure Aqua Service (option)
- 15. Maintenance, cleaning, and service
- 16. Disposal
- 17. Troubleshooting
- 18. Technical description
- 19. Contamination clearance certificate
- Word-Lesezeichen
- Leere Seite