Execute_write_response_phase(), Example – Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite User Manual
Page 74
Mentor Verification IP AE AXI4-Lite User Guide, V10.3
74
SystemVerilog Slave BFM
execute_write_response_phase()
April 2014
execute_write_response_phase()
This task executes a write phase previously created by the
task. This
phase can be blocking (default) or nonblocking, as defined by the transaction record
operation_mode field.
It sets the BVALID protocol signal at the approriate time defined by the transaction record
write_response_valid_delay field and sets the transaction_done field to 1 on completion of the
phase to indicate the whole transaction has completed.
Example
// Declare a local variable to hold the transaction record.
axi4_transaction write_trans;
// Create a slave transaction and assign it to the local
// write_trans variable.
write_trans = bfm.create_slave_transaction();
....
// Execute the write response phase for the write_trans transaction.
bfm.execute_write_response_phase(write_trans);
Prototype
task automatic execute_write_response_phase
(
_transaction trans
);
Arguments
trans
The _transaction record.
Returns
None