Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite - Manual (Page 181)

VHDL Master BFM
set_address_valid_delay()
Mentor Verification IP AE AXI4-Lite User Guide, V10.3 181
April 2014
set_address_valid_delay()
This nonblocking procedure sets the address_valid_delay field for a transaction that is uniquely
identified by the transaction_id field previously created by either the
create_write_transaction() or procedure.
Example
-- Create a write transaction with start address of 0.
-- Creation returns tr_id to identify the transaction.
create_write_transaction(0, tr_id, bfm_index, axi4_tr_if_0(bfm_index));
-- Set the address channel *VALID delay to 3 clock cycles
-- for the tr_id transaction.
set_address_valid_delay(3, tr_id, bfm_index, axi4_tr_if_0(bfm_index));
Prototype set_address_valid_delay
(
address_valid_delay: in integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in axi4_path_t; --optional
signal tr_if : inout axi4_vhd_if_struct_t
);
Arguments address_valid_delay Address channel ARVALID/AWVALID delay measured in ACLK
cycles for this transaction. Default: 0.
transaction_id Transaction identifier. Refer to “ Overloaded Procedure
Common Arguments ” on page 151 for more details.
bfm_id BFM identifier. Refer to “ Overloaded Procedure Common
Arguments ” on page 151 for more details.
path_id (Optional) Parallel process path identifier:
AXI4_PATH_0
AXI4_PATH_1
AXI4_PATH_2
AXI4_PATH_3
AXI4_PATH_4
Refer to “ Overloaded Procedure Common Arguments ” on
page 151 for more details.
tr_if Transaction signal interface. Refer to “ Overloaded Procedure
Common Arguments ” on page 151 for more details.
Returns None