Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite - Manual (Page 240)

Mentor Verification IP AE AXI4-Lite User Guide, V10.3 240
VHDL Slave BFM
set_write_data_mode()
April 2014
set_write_data_mode()
This nonblocking procedure sets the write_data_mode field for a transaction that is uniquely
identified by the transaction_id field previously created by the
create_slave_transaction()
procedure.
Note
You do not normally use this procedure in a slave test program.
Prototype set_write_data_mode
(
write_data_mode: in integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in axi4_path_t; --optional
signal tr_if : inout axi4_vhd_if_struct_t
);
Arguments write_data_mode Write data mode:
AXI4_DATA_AFTER_ADDRESS (default);
AXI4_DATA_WITH_ADDRESS;
transaction_id Transaction identifier. Refer to “ Overloaded Procedure Common
Arguments ” on page 151 for more details.
bfm_id BFM identifier. Refer to “ Overloaded Procedure Common Arguments ”
on page 151 for more details.
path_id (Optional) Parallel process path identifier:
AXI4_PATH_0
AXI4_PATH_1
AXI4_PATH_2
AXI4_PATH_3
AXI4_PATH_4
Refer to “ Overloaded Procedure Common Arguments ” on page 151
tr_if Transaction signal interface. Refer to “ Overloaded Procedure Common
Arguments ” on page 151 for more details.
Returns None