Setting up simulation from the windows gui, Figure 12-1. copy the contents of – Altera Mentor Verification IP Altera Edition AMBA AXI4-Lite User Manual
Page 354
Mentor Verification IP AE AXI4-Lite User Guide, V10.3
354
Getting Started with Qsys and the BFMs
Setting Up Simulation from the Windows GUI
April 2014
2. Using the cd command, change the directory path to your local path where the example
resides.
cd axi4lite-qsys-examples/ex1_back_to_back_sv
3. Open the Qsys tool. Refer to “
Setting Up Simulation from the Windows GUI
The following steps outline how to set up the simulation environment from a Windows GUI.
This example uses the Windows7 platform.
1. Create a work folder into which you copy the contents of the qsys-examples folder,
which includes the ex1_back_to_back_sv folder from the Installation.
a. Using the GUI, select a location for your work folder, then click the New folder
option on the window’s menu bar to create and name a work folder. For this
example, name the work folder axi4lite-qsys-examples. Refer to Figures
and
Figure 12-1. Copy the Contents of qsys-examples from the Installation Folder
b. Copy the contents of the qsys-examples folder from the Installation folder to your
work folder.
Open the Installation and work folders. In the Installation folder, double-click the
qsys-examples folder to select and open it. When the folder opens, type CTRL/A to