Xerox 7024 - Manual (Page 94)

RECEIVING
2
.
The terminal will automatically answer the telephone after
the specified number of rings. See Number of Rings.
INCOMING CALL
RECEIVE STD
3. The terminal will receive and print the incoming document.
Receive to memory______________________________________
The terminal automatically receives and stores documents into
memory when the terminal is out of supplies or when a paper
jam occurs. The following displays during the receive operation
if terminals are not communicating in error correct mode.
RECEIVE MEMORY STD
The following displays during the receive operation if terminals
are communicating in error correct mode:
RECEIVE ECM STD
The documents will print out from memory after the supplies
have been replaced or the paper jam is cleared.
To manually receive a document using a second
telephone
The Set Second Telephone setting should be set to ON if a second
telephone is connected to your terminal.
The terminal offers a switch back to fax feature if you answer the
telephone with the second telephone handset. Pressing [6] two
times on the second telephone handset within 12 seconds
instructs the terminal to switch the call back to the terminal.
1. When the telephone rings, lift the handset of the second
telephone and listen for the fax tones from the remote
terminal.
TELEPHONE
5*2 TELECOPIER 7024 USER HANDBOOK