Set resolution default, To set resolution default (menu 09, feature 06), Set resolution default -12 – Xerox 7024 User Manual
Page 130
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOM FEATURES AND SETTINGS
Set resolution default
The terminal has four resolution settings. The resolution setting
may be manually selected before each transmission or copy. The
default setting is STANDARD. Use the procedures below to
change the resolution default setting.
STANDARD-
Use for normal documents.
FINE-
Use for small print.
SUPER FINE- Use for small details with complex images.
HALFTONE- Use for originals with multiple shades of print
(for example, a picture.)
To set resolution default (Menu 09, Feature 06)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [6] to select SET RES DEFAULT.
6.SET RES DEFAULT
01-21
SELECT/ENTER
5. Press [Enter].
RESOLUTION:
STD
SELECT/ENTER
6. Press [Select] to select STD, FINE, SEINE or HTONE resolution.
RESOLUTION:
STD
SELECT/ENTER
7. Press [Enter] when the desired setting is displayed.
SET RES DEFAULT
COMPLETED
7-12
TELECOPIER 7024 USER HANDBOOK