Set contrast default, To set contrast default (menu 09, feature 07), Set contrast default -4 – Xerox 7024 User Manual
Page 122: To set contrast default (menu 09, feature 07) -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOM FEATURES AND SETTINGS
Set contrast default
The terminal has three selections for contrast: Normal, Dark or
Light, The contrast setting may be manually selected before
each transmission or copy. The default setting is Normal. Use the
procedures below to change the contrast default setting.
Normal: Select Normal when scanning originals with normal
contrast.
Dark:
Select Dark when scanning documents with faint
characters.
Light:
Select Light when scanning originals with colored
backgrounds.
To set contrast default (Menu 09, Feature 07)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [01, [9] to select menu 9.
9.USER SETTINGS
01-10 SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [7] to select SET CONTRAST.
7.SET CONTRAST
01-21 SELECT/ENTER
5. Press [Enter].
ORIGINAL:
NORM
SELECT/ENTER
6. Press [Select] to select NORMAL, DARK or LIGHT contrast.
ORIGINAL:
NORM
SELECT/ENTER
7. Press [Enter] to record the desired contrast.
SET CONTRAST
COMPLETED
7-4
TELECOPIER 7024 USER HANDBOOK