Xerox 7024 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DIAUING

Press [Enter].

(01)=N0THING STORED

SELECT/ENTER

5. If desired number is displayed, press [Select] and go to step 7.

If NOTHING STORED is displayed, press [Enter] and go to

step 6.

If an undesired number is displayed, press [Clear] and go to

step 6.

(01)=TEL. NUMBER

Use the terminal keypad to enter the telephone number (up

to 40 characters). When the telephone number is correct,

press [Enter],

(01)=SET PARAMETERS

SELECT/ENTER

If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to Step 12.

If the Forced 4800 or Secure Send options are desired, press
[Enter]-

FORCED 4800:

OFF

SELECT/ENTER

8. Press [Select] to display the desired setting; ON or OFF.

9. Press [Enter] to store the setti ng.

SECURE SEND:

OFF

SELECT/ENTER

10. Press [Select] to display the desired setting; ON or OFF.

11. Press [Enter] to store the setting.

(01)=LOCATION ID

SELECT/ENTER

12. if desired name is displayed, press [Select] and go to step 15.

if LOCATION ID is displayed, press [Enter] and goto step 13.

If an undesired name is displayed, press [Clear] and go to

step 13.

TELECOPIER 7024 USER HANDBOOK

2-5