Set polled mode, To set polled mode (menu 09, feature 01), Set polled mode -9 – Xerox 7024 User Manual

Page 127: To set polled mode (menu 09, feature 01) -9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set polled mode

CUSTOM FEATURES AND SETTINGS

This feature must be set for a polling operation and allows you
to determine which, if any, terminal can poll your terminal. The

polled mode feature has the following three selections.

FREE-

SECURE

OFF-

Any G3 terminal can poll your terminal. A password

is not required for polling.

The password must match the last four digits of the

remote terminal identification number.

No remote terminal can poll your terminal.

To set polled mode (Menu 09, Feature 01)

1. Press [Menu] to select the menu table.

l.SEND OPTIONSl

01-10

SELECT/ENTER

2. Press [0], [9] to select menu 9.

9.USER SETTINGS
01-10

SELECT/ENTER

3. Press [Enter] to select SET POLLED MODE.

l.SET POLLED MODE

01-21

SELECT/ENTER

4. Press [Enter].

POLLED MODE:

FREE

SELECT/ENTER

5. Press [Select] to select FREE, SECURE or OFF.

POLLED MODE:

SECURE

SELECT/ENTER

6. Press [Enter]. If you choose the polled setting SECURE, use

the terminal keypad to enter the password.

SET PASSWORD
PASSWORD:

poo

7. Press [Enter].

SET POLLED MODE

COMPLETED

TELECOPIER 7024 USER HANDBOOK

7-9