Xerox 7024 - Manual (Page 83)

SENDING
7. Press {Enter].
ENTER=USE MEMORY
SELECT/ENTER
8. If you want to store the polling document in memory, press
(Enter]. Storing the document in memory leaves the ADF
free for other uses.
If you want to leave the original to be polled in the ADF,
press [Select]. Polling from the ADF ties up the ADF until the
document is retrieved by a remote terminal.
STORE FOR POLLING
NUMBER OF PAGES:
9. For an automatic page count, press [Enter].
Note: If desired, use the terminal keypad to enter the exact
number of pages, including the cover page, in your document
and press [Enter]. The terminal compares this number with the
number of transmitted pages.
STORE FOR POLLING
COMPLETED
Note: If you stored the document in memory, your terminal will
scan the document POLL will display until the polling document
has been retrieved.
If you reach a memory full condition, an alarm will sound and a
memory full message will be displayed. Press [Enter] within one
minute to store all scanned originals. Press [Clear] to delete all
stored originals. Failure to press [Enter] within one minute
results in the cancellation of the job and an error message report
will be printed.
If you left the document in the ADF, your terminal can receive fax
messages as usual and complete delayed commands already in
memory, but cannot be used to scan or copy a document until
the polling document has been retrieved.
TELECOPIER 7024 USER HANDBOOK 3-19