Set number of redials, To set number of redials (menu 09, feature 18), Set number of redials -7 – Xerox 7024 User Manual
Page 125: Tosetnumberof redials (menu 09, feature 18) -7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set number of redials
TELECOPIER 7024 USER HANDBOOK
CUSTOM FEATURES AND SETTINGS
The terminal will automatically redial if it encounters a busy
signal. Use this feature to set the number of times your terminal
should redial before sounding its alarm to alert you of the
unsuccessful transmission. Settings of 2, 3,4 and 5 are available.
Automatic redial is not available if the remote terminal was
dialled using the telephone handset.
To set number of redials (Menu 09, Feature 18)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10 SELECT/ENTER
3. Press lEnter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [1], [8] to select SET NUMBER OF REDIALS.
18.SET # OF REDIALS
01-21
SELECT/ENTER
5- Press [Enter].
SET # OF REDIALS
ATTEMPTS:
2
6. Use the keypad to enter 2, 3,4 or 5 redial attempts.
SET # OF REDIALS
ATTEMPTS:
3
7. Press [Enter] when the desired setting is displayed.
SET # OF REDIALS
COMPLETED
7-7