Xerox 7024 - Manual (Page 27)

MENU TABLE
LOAD OSIGIMALS
SEP 30,91 8;00
IDLE MODE
MENU
Press [Select] to scroti forward or [Menu] to scroll
backward through the menu titles.
1. SendOptionsI 2. Send Options2 3. Polling Options
1. Long Original t.Defayed Send
SELECT
2. Secure Send
Mails,
4. Call Response
1.Delayed Polling
SELECT
i.Oelayed Group
Send ■
SELSa
3. Forced 4800
Mode_______
5. One-Touch
Set TAD Time
6. Speed Dial Setup
One-Touch 01 to
24___________
7. Print Reports
Speed Dial 01 to 55
8. Pending Jobs
1.Activity Report
SELECT
2.Mutti-Polling
SELECT
3. Relay Send
2.0ptions Report
.SELECT
3.Store For Polling
, ,SELSa
4.Send Secure Mall
ENTER
To select "1 Store for Potting,
press [Enter] when "3 Store for Polling"
is displayed..
SELEa
3.Dial Directory
1.Store for
Polling.__
SELECT
2.Erase Polling
Doc.
SELEa
3.Print Polling
Doc._______
1.
2 .
3.
4.
From the idle mode, press {Menu).
To select the desired menu, use one of the following methods:
• Use the keypad to enter the desired menu number {01-11) or;
• Press (Select) to scroll forward or press (Menu) to scroll backward through the menu titles.
When the desired menu is displayed, press {Enter).
To select the desired feature, use one of the following methods:
• Use the keypad to enter the desired feature number or;
• Press {Select! to advance through the features.
When the desired feature is displayed, press (Enter) to set the feature.
Note: Menu 11 will be displayed only if you havea RS-232 interface board installed in your terminal.
9. Liter Settingt
1.Pending Job Litt
SELEa
2.Print Pending
Doc.
3.Erase Pending
Job__________
10. Program
One-Touch
1.Polled Mode
SELEa
2.Auto Rev, Time
SELEa SELEa
3.Confirm Reporl
4.Scanner Width
S.Halftone
6. Res Default
7.Cort1rast
B.Time Pause
9.Number Rings
10.2nd Telephone
11.Ant. Machine
12.Activity Report
li.Rcv. Reduction
14.BIock Junk Fax
tS.ECM Mode
16.Copy Protect
I.One-touch
SELEa SELEa
2.Program One
Touch_______
Pré« [Select]
to advance to
the next feature.
11. RS-232
ENTER ENTER ENTER
X
ENTER
r X
ENTER
^ X
ENTER
C______
ENTER ENTER ENTER 1 enter ENTER
1.RS-232 Print
SELEa
2.RS-232 Settings
17.Dialling Type
IS.Set # of Redials
19.Redial Interval
20.Date and Time
21.Local ID/Name
ENTER
I.Baud Rate
SELEa
2.Set Parity
SELEa
3.Set Stop Bit
SELEa
4.Char Length