Xerox 7024 - Manual (Page 68)

SENDING
Delayed send
This feature allows the terminal to be set up for a delayed send
operation up to one month in advance. The terminal can store
up to five delayed dialling jobs at one time. Only one delayed
group send or multi-polling job can be included in the five jobs.
This function may be useful for transmitting documents when
lower telephone rates apply.
Delay Start Pending will display when the terminal is waiting to
perform a delayed operation or redial a busy number.
To set delayed send (Menu 02, Feature 1)
1. Load the original in the ADF with the printed side down.
Press [Select] to select the resolution. Press [Original] to
select the contrast, if desired.
DIAL/PRESS COPY
STD NORM
2. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
3. Press [0], [2] to select menu 2.
2.SEND 0PTI0NS2
01-10
SELECT/ENTER
4. Press [Enter] to select delayed send.
1.DELAYED SEND
1-4 SELECT/ENTER
5. Press [Enter].
ENTER>USE MEMORY
SELECT/ENTER
If you want the transmission to be from memory, press
[Enter]. Transmitting from memory leaves the ADF free for
other transmissions.
If you want the transmission to be from the ADF, press
[Select]. A delayed send job from the ADF ties up the ADF
until the operation is completed and will be canceled if the
original is removed from the ADF.
DELAYED SEND
NUMBER OF PAGES:
1. The original(s) must be loaded in the ADF to access this feature.
3-4 TELECOPIER 7024 USER HANDBOOK