Xerox 7024 - Manual (Page 62)

DIALLING
To manually dial for voice contact
1. Lift the handset, wait for a dial tone and enter the telephone
number or press [Voice Request] and use the keypad to enter
the telephone number.
2. Once voice contact has been established, a facsimile
transmission can still be started. Refer to Sending or
Receiving sections.
To dial using one touch numbers
Tediai one touch numbers 01-24
To dial one touch numbers P1-P6:
To dial program one touch numbers P1-P6;
Press the one touch key [01] -[24] programmed for the remote
facsimile.
Load originals, press [Pause], and press the desired [PI] - [P6] key
programmed for the remote facsimile.
Load originals and press the desired program one touch key,
P1-P6, programmed for the remote facsimile.^
During transmission, the display shows remote terminal name or
ID (telephone number) on the first line and the specified/actual
transmission mode on the second line.
See Dial Directory for establishing the directory and assigning
numbers to the one touch keys.
Note: If one touch numbers P1-P6 are programmed for both one
touch and programmable one touch functions^ the one touch
will have priority dialling in all sending and polling features in
the Send Options2 and Polling Options menus.
To dial using speed dial numbers_______________________
Press [Speed Dial] followed by the two digit speed dial number
programmed for the remote facsimile and [Start].
During transmission, the display shows remote terminal name or
ID (telephone number) on the first line and the specified/actual
transmission mode on the second line. See Dial Directory for
establishing the directory and assigning numbers to the speed
dial keys.
1. The numbers entered in these keys cannot be used in the Sending and Polling features In the Send
Options2and Polling Options menus.
2-20 TELECOPIER 7024 USER HANDBOOK