Set scanner width, To set scanner width (menu 09, feature 04), Set scanner width -18 – Xerox 7024 User Manual
Page 136: To set scanner width (menu 09, feature 04) -18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOM FEATURES AND SETTINGS
Set scanner width
The terminal offers a choice of two scanning widths: standard
(8.5 inch) and wide scan (up to 9.9 inch.)
Select NO when scanning standard 8.5 inch documents. Any area
outside the 8.5 scanning area will be ignored and transmitted
without reducing the original.
Select ON (wide scan) when scanning documents up to 9.9
inches. Originals will be reduced and transmitted at 84%.
The default setting for this feature is ON.
To set scanner width (Menu 09, Feature 04)
1. Press [Menu] to select the menu mode.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [4] to select SET SCANNER WIDTH.
4.SET SCANNER WIDTH
01-21 SELECT/ENTER
5. Press [Enter].
WIDE SCAN:
ON
SELECT/ENTER
6. Press [Select] to select ON or NO.
WIDE SCAN;
ON
SELECT/ENTER
WIDE SCAN:
NO
SELECT/ENTER
7. Press [Enter],
SET SCANNER WIDTH
COMPLETED
7-18
TELECOPIER 7024 USER HANDBOOK