Xerox 7024 - Manual (Page 16)

INSTALLATION
Operating Environment
Do not install the terminal in a location that would expose it to
any of the following environmental factors that could create
safety hazards or adversely affect operation.
• Direct sunlight
• Direct air flow from heaters, air conditioners, ventilation
ports, etc.
• Rapid temperature fluctuations-Too rapid heating of a cold
room can cause water vapor to condense onto the paper,
where It then Interferes with image transfer.
• Extreme temperatures or humidity outside the
recommended operating range.
• Ammonia from diazo duplicators, etc.
• Poor ventilation
• Excessive dust or vibration
• Volatile materials
• Curtains or other flammable materials to close to the unit
Unpacking
1. After opening the shipping carton, check for the following
items:
1. User handbook 6. Handset cord
2. Operator guide 7. Telephone line cord
3. Document output tray 8. Power cord
4. Document input tray 9. Telephone handset
5. Xerox paper
2.
3.
4.
5.
Remove the plastic from the terminal and place terminal in
the designated location.
Remove the plastic bag containing the customer assistance
label from the control panel and set aside.
Remove the protective covering from the control panel.
Press the Scanner Release Button (Document Release Knob -
see Component identification) to open the scanner cover and
remove the vi nyl sheet.
TELECOPIER 7024 USER HANDBOOK