Forced 4800, To set forced 4800 (menu 01, feature 3), Forced 4800 -15 – Xerox 7024 User Manual
Page 79: To set forced 4800 (menu 01, feature 3) -15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
Forced 4800
This feature will force any transmission to occur at 4800 Bits Per
Second (BPS) and is used when the remote fax terminal or
telecommunication lines require a slower transmission speed.
When OFF is selected, the terminal will attempt the transmission
at 9600 and, if needed, switch the transmission to a slower rate.
This feature deactivates after each transmission.
To set forced 4800 (Menu 01, Feature 3)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
2. Press [Enter] to select the first feature within the menu.
l.LONG ORIGINAL MODE
1-3
SELECT/ENTER
3. Press [3] to select forced 4800,
FORCED 4800 MODE
1-3
SELECT/ENTER
4. Press [Enter].
FORCED 4800:
OFF
SELECT/ENTER
5. Press [Select] to select OFF or ON.
FORCED 4800:
OFF
SELECT/ENTER
6. Press [Enter].
FORCED 4800 MODE
COMPLETED
7. Refer to the desired send feature.
TELECOPIER 7024 USER HANDBOOK
3-15