Xerox 7024 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SENDING
7. For an automatic page count, press [Enter].
Note:
If desired, use the terminal keypad to enter the exact
number of pages in your document, including the cover page
before pressing [Enter]. The terminal compares this number to
the number of pages transmitted.
DELAYED SEND
ENTER FAX NUMBER
8. Use the terminal keypad, one-touch key or speed dial key to
enter the telephone number.
DELAYED SEND
[03], (01)
9. When the telephone number is entered, press [Enter].
DELAYED SEND
ENTER DAY:
02,14:50
10. If you want the operation to start immediately, press [Enter].
If you want a specific start date and time, enter using the
terminal keypad.
•
Enter the desired date and press [Enter].
•
Enter the hour, in 24 hour format, and press [Enter].
•
Enter the desired minutes and press [Enter].
DELAYED SEND
COMPLETED
Note: If you requested transmission from memory, the terminal
will scan the document into memory. If you reach a memory full
condition, an alarm will sound and a memory full message will
be displayed. Press [Enter] within one minute to store all
scanned originals. Any partial page will be deleted. Press [Clear]
to delete all stored originals. Failure to respond within one
minute results in the cancellation of the job and an error
message report will be printed.
If a specific time was entered, the display will flash DELAY START
PENDING.
TELECOPIER 7024 USER HANDBOOK
3-5