To program keys (p1-p6) for relay send, To program keys (pi-p6) for relay send -14 – Xerox 7024 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DIALUNG

To program keys (P1-P6) for relay send

Note: Steps 1 through 7 appear on pages 2-10 and 2-11. For an
explanation of relay send, see section 3, Sending.

8. Press [Enter] to select RELAY SEND.

ENTER=USE MEMORY

SELECT/ENTER

9. If you want to transmit the relay send from memory, press

[Enter].

If you want to transmit the document from the ADF, press
[Select].

RELAY SEND
PASSWORD:

10. Use the terminal keypad to enter the two digit password

obtained from the relay station and press [Enter].

ENTER*COPY TO RELAY

SELECT/ENTER

11. Press [Enter] to request a printout at the relay station or

[Select] to suppress the printout.

RELAY SEND
TERM.:

12. Use the numeric keypad to enter the group number(s)

already programmed at the remote relay station. This Is the
groups to which the relay station will retransmit your
document. Up to five groups can be entered. Press [Menu]
after entering each number.

RELAY SEND
TERM.

13. Press [Enter].

RELAY SEND
NUMBER OF PAGES:

2-14

TELECOPIER 7024 USER HANDBOOK