Xerox 7024 - Manual (Page 89)

Copying a document
Copying
The terminal can be used as a copier to make single or multiple
full size or reduced copies. The originals are scanned and the
information is stored in memory during the multiple copy
operation.
The selections for the redurtion rates are: AUTO, 100®/o, 97%,
91%, 81% or 75%. The default selection for a single copy is 84%.
The default selection for multiple copies is AUTO. IF AUTO is
selected, the terminal will attempt to reduce the original to fit
on one page. If the original does not fit on one page using the
maximum rate, the originals will be printed at 100% on multiple
pages.
Press [Stop] to cancel the copy operation.
To copy a document
The originals are loaded in the ADF with the printed side down.
You should determine if the document(s) have any special
contrast or resolution requirements.
The [Resolution] button is used to cycle the display through the
available options and select the resolution most appropriate for
the contents of the original. The default is Fine.
B
Selection Originals
Standard Originals with normal size print
Fine Originals with small print or other fine
detail
Super Fine Originals with extremely fine detail
Halftone Originals containing photographs
G2 Not operational in copy mode.
The [Original] button is used to cycle the display through the
available options and select the contrast most appropriate for
the original. The default is Normal.
Selection Originals
Normal Originals with normal contrast
Dark Originals with faint characters
Light Originals with colored backgrounds
telecopier 7024 USER HANDBOOK 4-1