Xerox 7024 - Manual (Page 84)

SENDING
Cancel and interrupt procedures
The interrupt mode allows you to interrupt a delayed group
send, multi-polling or other operation. You can then perform a
basic send operation or set up another job.
The previous operation will resume at the point it was
interrupted when the second job is completed.
To interrupt a job
During operation, press [Speed Dial] to request an interrupt.
The terminal will complete the current operation and sound
a 10 second alarm.
INTERRUPT
SEP 30'91 15:40
3. Set up the second job. When the terminal has completed
your second job, the previous job will resume at the point it
was interrupted.
Note: The interrupt feature does not allow other group
send or multhpolling operations. The new job must be
entered within one minute or the terminal will resume the
first Job automatically and ignore the interrupt request
To cancel a job____________________________________________
Canceling operations differ for each operation or status of the
terminal. Follow the procedures below to cancel a job.
Status of the terminal Keys to press to cancel a job
On line
When communicating
with one remote terminal
stop I
Delayed group send
Multi -polling
Speed Dial Stop Erase the pending jobs
in memory
[0] [8] [ Enter
I
[3] I Clear "|
Waiting for
a delayed
send
or
the next
redial
attempt
When the original is
loaded in the ADF Stop
When no original is loaded
in the ADF
• Pending jobs are
stored in memory
Erase the pending jobs To identify job number:
in memory Print Job List
1 Menu 1 [01 [81 . Enter 1 [31 Clear |
3-20 TELECOPIER 7024 USER HANDBOOK